Quote:
Originally Posted by Thefalls
That is some good info.
3SGTE oil filters are widely available, so its not an issue.
If one is really fussy about mounting the cooler on the left side ( for its passenger side as I'm RHD, the proper side )))) ) then is it possible to relocate the washer bottle to the right side. It shouldn't be so difficult, just some wire extension and small hose is needed.
The question is, the reduction in hose length that will result after the relocation of the washer bottle will have any considerable effect on the oil pressure?
Thanks for your inputs.
PS: I thought Greddy sold only blue cooler cores. Haven't seen red ones.
|
Red cores were a limited production of 50.
No meaningful effect on pressure, as this is way far back in the chain.