Quote:
Originally Posted by strat61caster
wut
You have removed a catalytic converter, it's a miracle you didn't get hit on the visual inspection and they bothered to plug the scanner in at all. If the OBD2 port was not communicating it would not have printed out "Evaporative System and Oxygen Sensor" as the error code causing failure.
You need to reinstall the stock header with catalytic converter, keep the stock tune on, and clear the codes on the ECU before returning. You cannot pass California emissions without an OE or certified replacement catalytic converter in the header system.
|
If the smog ref gave it an ok on visual inspection, then he does not need to worry about this, he just has to get those monitors complete.