[Parappa]

I guess taking off the relay was the hardest part. I tried following the video but just ended up tugging the relay until it detached from the bracket. Then unclipped the relay and put on the new version and clipped it back to the bracket. No cuts on my hand but took a bit of patience and about half a beer.

The rest was simple. The bolts holding the stock lights were surprising loose. I have read that over tightening could crack the casing. I think the easiest way to relate..... it's like tightennig IKEA furniture. Finger tight and a hair more. But not too much. LOL

If you might feel intimated with this install, don't be. Its easier than building a desk unit from IKEA.

Love how they look, much more updated than the stocks. Very satisfied.

If there is condensation I will open it up and seal the Tom's gaskets with 3M black weather adhesive.