Update on the Blubster
It's been a while since we ran it last. Busy with other development projects so it took us a while to get it ready for the track again with the new mods.
5" splitter of 10mm Alumalite replaces our ebay lip
GT250 2D wing replaces the duck tail spoiler
Singular Motorsports endplates
18x10 +35 XXR 527F (forged CNC) wheels to replace the Forgestars. We terminally bent all 4 Forgestars on the first day we ran them.
Crawford BPB manifold spacers
Delicious tune for the BPB
949 Racing Billet Camber Plates
Whiteline rear camber bushings
Renderos Racing 4 pt roll bar
Safequip FIA 6 pt harnesses
Element fire suppression stick
Production style Xidas and our camber plates give us -5° front camber. We were stuck at around -3.5° before. Won't know until we get it on track but we think all the updates should make it about 1.5~2s faster. Going to be hot at CVR this weekend so we might not see its full potential. Fingers crossed it all works as I hope it will.
Running at Chuckwalla this weekend. If you're there, come by and ask for a ride if you have been jabbed. Our crew is all jabbed now.