View Single Post
Old 05-16-2019, 08:56 AM   #1406
ajc209
Senior Member
 
Join Date: Dec 2011
Drives: GT86 Cosworth
Location: UK
Posts: 753
Thanks: 361
Thanked 270 Times in 188 Posts
Mentioned: 9 Post(s)
Tagged: 1 Thread(s)
Hola! Havent been on here a while. Ive jsut spent an hour catching up on everything! Some new owners I see - Welcome!

Mine been on the car 3.5 years and covered about 15k miles of which 8-10 trackdays (been slacking the last year) and a few drive training courses.

Smaller pulley has been on about a year and the car runs nicely in all situations, be in crusing on the motorway or hammering it at the track. Boost is up to about 0.7Ba peak now.

Weeder you are back in a 86/BRZ now?

I never installed a catch CAN after speaking to Matt about it and the low levels of blow by they experienced. My view is that adding more complexity in the form of extra pipe connections and routing when not needed it just adding and extra failure point for no good reason.

In other news I also run the Forester oil cooler now and it works quite nicely with the low temp T stat at keeping oil temps below 130C at the track.


Pic for attention

ajc209 is offline   Reply With Quote
The Following 2 Users Say Thank You to ajc209 For This Useful Post:
sroby (06-08-2019), weederr33 (05-16-2019)