You asked and we listened.
We've been really excited to hear all the positive feedback on our SS1 coilovers over the past 4 years. Great ride quality and solid performance...a phenomenal 4 season road & track type coilover.
But we know many of you wanted something a bit more on the
track side, with a little more edge to them. Something with the same high quality damper valving, suspension travel, lowering front camber plates, but add rear lowering upper mounts, firmer valving, and stiffer spring rates.
So we've been quietly working with
KW Suspension and are excited to finally release our SS2 coilovers! Development was performed on both first and second gen cars with enough flexibility for a range of tire choices, drivers, and supporting modifications.
While it's a little more
track focused, this coilover suspension is still very capable of being daily-driven, and with the pre-installed
front camber plates and rear pillowball lowering mounts, the whole kit is completely plug-and-play. No assembly required.
These camber plates and rear mounts are some of the best out there in our opinion, with a lowering design that adds bump travel as well as a high quality bearing that's sealed on the bottom for long-lasting quiet operation.
Features:
- 20 clicks of adjustable rebound damping
- 7 kg/mm front and rear linear springs with helper springs.
- Front lowering camber plates
- Rear lowering alloy mounts
- Weatherstrip seals for front and rear mounts
- Increased spring rates over SS1
- Increased damper valving with larger range of adjustment than SS1’s
- Zinc coated galvanized shock bodies with exceptional suspension travel
These are live on our website now.