Quote:
Originally Posted by SmartedPanda
Hey Thanks!
1. I already have it and tested on other parts, so far so good at 80mph.
2. I'll double up on the sizing.
3. Would the bolts fit into the BRZ holes? I'm pretty sure they don't but not confident.
Would you take off the Toyota weather stripping the 3M that? Most of it is 3M+Weather Stripping combined.
|
yeah, i'm just extremely paranoid about the tape now that i've gotten some crap rolls...
i haven't a clue on the bolt hole-ing. however, i can tell you that this spoiler fits the oem brz spoiler holes perfectly
https://www.ebay.com/itm/Fits-13-20-...72.m2749.l2649
because of that i have a sneaking suspicion that they will likely line up-- subaru and toyota have a pretty decent history of not dramatically changing things just to screw people over(i'm looking at you GM).
the way i would check is to get a large piece of cardboard-- bigger than the spoiler. stab all the bolts through the cardboard, then remove the spoiler, and use the cardboard as a crude template to check the rough bolt location and spacing on the trunk.