Quote:
Originally Posted by dnieves
I replaced almost all my bulbs with LEDs and an electronic flasher (to prevent hyperflash and errors) since I purchased my 10 Series in 2013. I finally changed the last two bulbs when I swapped out the factory side markers with JDM OEM clear side markers from FT86SpeedFactory (I used the bundled yellow LEDs).
Here's my problem:
When I have my headlights & parking lights off (just the OEM LED DRLs turned on) the clock and dual AC display flash whenever I use my turn indicators.
BUT when I have my parking or headlights turned on the clock and AC display does not flash when I use my turn signals.
I sent an email to FT86SpeedFactory last weekend but have not received a response. Could it be I need one of their $60 flashers or is this normal when you have OEM LED DRLs (ex. Monogram, Release series, BRZ, 86)?
|
I had pretty much the same issue when I upgraded to LED's on my 10 series. I ended up ditching the LED flasher relay, put the stock relay back in and put resistors on the front blinkers to fix the problem.