View Single Post
Old 05-04-2021, 10:20 PM   #5
Joon525
Senior Member
 
Joon525's Avatar
 
Join Date: Jun 2016
Drives: 2016 BRZ
Location: NJ
Posts: 362
Thanks: 53
Thanked 160 Times in 105 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
You MIGHT have trouble with some camber plates in conjunction with these.
Raceseng's actually have a portion that rises UP in the opening. Maybe you will be lucky enough to use them if there's enough space to let the lip of this do its thing.

Other camber plates are perfectly flat and thus cause less of a problem.
This

vs


Also, even if you have a flat camber plate your camber setting could be pushing the locking bolts right up to the edge of the opening (depends on the brand and your setting) but you could notch the lip.

Just something to look out for. These aren't a bad idea but as the other guys mentioned, a lot of dirt comes from UNDER the plate. Still though, not a bad idea.
Joon525 is offline   Reply With Quote
The Following User Says Thank You to Joon525 For This Useful Post:
therealstoly (05-06-2021)