Quote:
Originally Posted by BR-ZED
That might explain it then.... this was middle of the band, around 4k. Will have to check my logs when i get home to see what it looks like at higher rpm.
Toast, was that on the stock pulley? 11 is a lot bigger than 9...
|
my bar per logs is .7 over 1 bar at 7300 rpm = 10 psi
my bar at idle averages .30 to .25 .. I'm just gonna call it .7 below standard atmospheric press.. -10 psi at idle below so that's a vacuum
Idle log below .. I'm not able to use datazap on current comp so that link may or may not work
https://datazap.me/u/scdata2?log=0&data=30