Quote:
Originally Posted by Grip Ronin
ok i got the table working thanks.
now if my requested tq is higher then my torque base say 207req/ 200base i get a 1.035 such as the stock maps are. That should be using the 1.0 raw ecu value from the target throttle position table since thats the max, but thats set to 102.4 stock and the throttle body is open only to 90%.?? There is somthing i dont understand here, do the calculated tq tables come into play?
|
That's why I changed the throttle angle table to be consistent with what I know from ECUtek (Max 86). I've logged and that will give you 100% commanded throttle, however the throttle angle will never show a real 100%. If it makes your life easier you could change the expression calculation for commanded throttle angle so that it shows throttle max as 100%. Just need to do some maths
I honestly don't know what the calculated Torque tables do, and from what I've read on Romraider and NASIOC I can't come to any conclusion.