Quote:
Originally Posted by Ninjin
I had a couple issues with my Whiteline bar as well. Make sure that the end link joints on the front aren't binding. This can happen if the end links are set too short and the pivot joint can't move far enough for the sway bar's motion. The other issue I had was interference with the LCA. The Whiteline fsb isn't the same shape as stock and will impact the LCA if the end links are set too long.
Sent from my Nexus S using Tapatalk 2
|
yeah thats what i noticed and was wondering if i should switch bars or endlinks because it comes really close to the LCA even at the shortest setting