Quote:
Originally Posted by Tristor
Yes, you can still install the pad from the back of the caliper by removing two pins and the spring clip, just as you can on any other Brembo caliper.
|
Quote:
Originally Posted by Lynxis
There is some competing information regarding pad swaps with the BM4 in this thread:
|
Thanks for pointing this out to me, I'll see if I can wiggle the pads out of the caliper without removing it next time I need to change the pads!
The solid "bridge" on the outside of the caliper surely made it look like I have to remove the caliper;
and that was confirmed to me by one of the suppliers.
But also when I tried to wiggle the spring clip out of the caliper the diagonal shape of that bridge came in very handy,
so there might be a similar clever way to get the pads out.