Quote:
Originally Posted by BlaqkHavok
Thank you! yes that is very much my style as well, going for an OEM+ finish on the install of anything that has an aesthetic appeal.
personally i will also be looking for where in the fire wall that i can run a new batch of wiring. through that i will be running any signal wires as well as a dedicated power and ground lead that goes right to a split distribution block.. pos+ always on, pos+ ignition (relayed from dedicated + in), and negative.
i have half a notion to go with a threaded pass-through like a mil-spec plug.
|
I passed a lot of stuff through the sound tube opening once that was deleted.
I also used a tap a fuse wired to a new mini fuse box for easy access to eng on fuses. Alternatively you could do tap a fuse to a relay to have added fuse box wired directly to battery if you planned on running more current through it than a tap a fuse can handle. Or a split box for always on and eng on.