Quote:
Originally Posted by MrClean614
Can someone confirm whether or not the Eibach bolt on spacers will work with the factory Performance Pkg wheels?
My concern is that the bolt on ones require the wheels have pockets on the backside to clear the factory studs when the spacer is bolted down.
http://www.ft86speedfactory.com/eiba...l#.W428oxopChC
|
Took my wheel off, found a 20mm H&R spacer with 5x100 pattern and did some measurements with dial calipers. Appears I have about 0.050”-0.085” clearance between the poke of the studs through the spacer and the recessed area of the wheel pockets.
Poke: ~0.175”
Pocket: 0.225” to 0.260”
Still couldn’t hurt to have someone with actual use confirm.
Thanks!