Hi, sorry you are having issues with the kit. The leak you are experiencing looks like the AN compression connection is not tight enough. To get a good seal, you want to hold the 45 degree fitting with a wrench and tighten the -10 hose end.
I see you have high temp thread sealant on the flare ends. You should't have to put any thread sealants at this joint.
Regarding the other issue where it leaks on the o-ring. Mocal had a design flaw on their spacer. The spacer would bottom out on the oil filter adapter before the o-rings gets a good crush on it. They have since redesigned it and replaced the defective adapters. If you have any questions or concerns, please give us a call and ask for LJ 952-431-1399 Thanks.
|