Quote:
Originally Posted by APEX Race Parts
That fitment will be pretty aggressive on the fender side. For reference we offer an 18x9.5" ET40 (5mm less poke) and with a 255/35-18, we recommend a minimum of -2 degrees camber front and rear. With a track oriented tire that runs extra wide closer to -3 degrees front and -2.5 rear are needed. With an ET35 offset, the needed camber will be a bit higher. This fitment will be tricky without adding coilovers, front camber plates, and adjustable rear arms to dial in the right alignment specs.
-Ian
|
Thanks Ian appreciate the info!!!