Quote:
Originally Posted by Leonardo
That's wrong, sorry. Ive run 18x9 with 245/35 in the front with +37, +32, and +30 offsets. I had between -1 to -1.5 from just a set of camber bolts. Never rubbed the fender. though , I was close to the spring perch, but did not rub.
Op you will be fine.
Edit: I was also lowered more with softer springs in the front. Vs RCE Yellow springs.
|
You are totally right, it looks like I might have entered something wrong - that's on me, don't blame the site I linked.
I am seeing OPs setup clearing with very little camber, and to verify the site I entered the fitments you mentioned and it shows them all clearing to a similar tolerance.