Quote:
Originally Posted by EndlessAzure
No. There isn't natively.
Typically for US market, the FRS LEDs are only active for DRL, which you have to custom spice power from the original DRL source (from DRL resistor source). This is separate from the parking power.
Diode Dynamics and Beatrush offer a DRL always on harness kit with a resistor that supposedly dims night time output, but I don't have experience with it. Again, I believe you need to implment original DRL function to use it (aka power from resistor source). There is also a DIY where you wire in an inline resistor.
|
So if I connect headlight LED (+) to the DRL source (+), the LED strip will turn off when the low/high beams are on?
I don't like the LED strip much and was thinking of just removing the LED light functionality altogether, but this is a good compromise. Thanks so much! I'll try this next.