Quote:
Originally Posted by ahquit
Resurrecting this old thread...
From reading the thread it sounds like the gt86 and jdm lights would be wired the same since Moto-P seems to use either title interchangeably.
However, I picked up a set of jdm lights (will swap to lhd cutoff) and they only have 6 wires in the 8 pin harness, not 7 like in Moto-P's guide.
For anyone who installed actual jdm lights (and not euro gt86 lights), what order did you pin the wires?
I saw the garagefrs page, and the lights they used also have 6 wires but not all the same colors (theirs has a white wire but mine has a green wire). So it's a bit confusing! (Below is a pic of mine)
Sent from my A0001 using Tapatalk
|
You sure those are JDM?
My jdm set had 7. Moto and I got our headlights from the same source.
The USDM 10Series/RS1.0/RS2.0 all have 6 wires in the 8 wire plug.