Quote:
Originally Posted by Shutter
if you gave them the 3062aa111 number, they probably gave you the "wrong" slave. IE, the fitting on it faces a slightly different way. Still fits though, but the line could have extra stress on it since it points the banjo fitting further away.
I installed mine last night, everything went on just fine. Since I'm running the "wrong" one, I might remove the bracket between the hardline and the rubber line and bend the metal hardline so its a little closer to the slave. Or just replace the whole line entirely with an aftermarket one.
|
You could install the banjo like the
photo I posted here in @
Ultramaroon's original thread. It's not ideal but would work to keep the banjo from loosening the bolt. I believe @
Ultramaroon is currently using this as a workaround with his slave.