|
Just. stop.
Looking at your other post...
The two blue wires near the socket, that's your lo ground and lo power. Stick the ground back to the socket and install a halogen H1 in there and stick the power wire to it. If you're flipping the high beams on and off and you can hear a solenoid going clack clack inside the headlights, that's working fine. See diagram, you don't need a hi/lo bulb, there's a shade in the projector that flips down for high beams.
Restore the headlight to it's original setup. Install normal H1 bulbs, confirm operation and light output, that is your number one priority. Once you've got lights on the car, you'll have all the time in the world to pay too much money to some shady online retailer for some wonky LEDs that'll fail too soon. When dealing with bad things badly installed by bad people, you don't way to play around in the mess they made, go as far back towards stock as you can go. You probably don't have a set of stock headlights lying around, but at least you can ditch the shitty LEDs.
|