Quote:
Originally Posted by RedReplicant
2. Oil temp sensor calibration is way off
The car seems like it might bleed fine, the thermostat opened up but I boiled the fluid up and out of my Liste funnel.
|
Is your oil temp sensor reading also stuck reading -40c?
Mine is doing the same thing, I've tried the various Haltech/Bosch temp sensor calibrations and its still the same.
Oil pressure readings are fine, however.
I also used the Miata right side coolant neck and added the extra heater hoses on the left side, I've found after bleeding with the Lisle funnel a few times, just top it off, close the radiator cap and see if you get heat/are fully bled.