Quote:
Originally Posted by Freeman
Bob is it possible to do a JRSC overlay with the Edlebrock dyno? Just to help potential buyers out
Assuming you have 2 dynos that have similar mods and fuel
|
Quote:
Originally Posted by Alltezza
Now this is where I'm confused how does a centrifugal SC have similar power/TQ under the curve? I thought a roots or twin screw are the ones that dominate that area.
|
E-Force standard pulley 91 vs E85
JRSC standard pulley 91 vs E85
Quote:
Originally Posted by j123ic
The unit Drift-Office received is currently running the 3.25" supercharger pulley. The E-Force 1320 supercharger is nowhere near its capacity with the 3.25" pulley being used. There's still a 3.00", 2.75", and 2.625" pulley to play with. And even with the 2.625" pulley, there's still room to spin it faster if desired. You'll quickly see that gap between torque curves increase the smaller you go.
How fast can the JRSC spin?
|
High boost pulley puts it at 96% of the C30-94's speed/capacity.