View Single Post
Old 10-29-2016, 01:06 PM   #3248
Hyperblu
Member
 
Hyperblu's Avatar
 
Join Date: Nov 2015
Drives: 2016 Series.Hyperblue BRZ
Location: California
Posts: 17
Thanks: 5
Thanked 11 Times in 6 Posts
Mentioned: 0 Post(s)
Tagged: 1 Thread(s)
Quote:
Originally Posted by 15limited View Post
You should have plenty of room, closest point of contact would be your tire to the spring perch. I'm slightly lower in the front with -1.5 camber and I wouldn't want to get any closer than that, same wheel specs and tire width. I've heard tire manufacture measurements can vary but I've ran Falkens and... whatever different tire I'm on now and neither rubbed. I would recommend camber bolts anyways and an alignment to get this dialed in to where you want them.
So they dont have the wheels I want, but they have similar size but with a +45 offset, im not too good with offsets so Im not really sure if they fit?. Im reading up on it but if theres any threads out there with info I could use I'd really appreciate a link. Thanks!

Sent from my SAMSUNG-SM-G930A using Tapatalk
Hyperblu is offline   Reply With Quote