Quote:
Originally Posted by Cody
Hey, out of curiosity how did you get the water/ condensation out without cutting the lights back open?? I am getting water in mine because the water goes under the vanity guard. I cut the lights open to paint them and thought siliconing around the gasket would fix it, it didn't, so i ordered the foam. I just don't want to have to recut and close the lights.......
|
For another car I have that had this issue, I did the following to dry out the housing. We have an upright clothes dryer that has a shoe rack. I put this in, put the housing on the rack and ran the dryer on low heat for as long as it took for the moisture to evaporate. YMMV