Quote:
Originally Posted by FR-S2GT86
So, you have speakers in all of the OEM locations plus a subwoofer. Got it. In Standard Mode, the speakers are set up as front left and right, rear left and right, and subwoofer left and right. Keep that in mind.
Couple more questions:
1) Are you using the factory amplifier for the door speakers?
2) How many channels of amplification will you be using in your system?
3) Are you planning to use the head unit to power any of your speakers?
EDIT: I can already see that you're going to have problems trying to get the time alignment to work properly.
|
thanks for your time.
I don't think you understood me, maybe because of the translations.
my speaker system is OEM audio plus, but the amplifiers are blam brand, both amplifiers connected by RCA / low, all this connected to my Pioneer, there is no speaker powered by the amplifier of the radio. so all the front, rear and subwoofer channels are separated.
front cut-off: 100Hz -24db
cut back: 125Hz -24db
subwoofer cutoff: 100Hz
-24db
EQ
80Hz +1
125Hz +2
200Hz +1
315Hz +1
1.25k -1
2k -1
3.15k -1
12.5k +1
sound improve: lvl1