Quote:
Originally Posted by Ads
I'm afraid I'm even more confused after reading through your DIY.. My brain is not working atm..
EDIT - I think I am getting my head around it now. I will create the adapter so I don't have to splice into OEM wiring and then plug in the bypassed plug in the back to the amp. Is that pretty much it in a nutshell?
So I can just buy these adapters:
https://www.amazon.com.au/Metra-70-1.../dp/B0002BEQJ8
I believe the above is the same plug as the Scosche TA02RB? And this:
https://www.amazon.com.au/AUTOHAUX-7...%2C1320&sr=8-7
..is the same as the TA02B?
|
Yes to all three questions. Also, you will need the antenna adapters as well.
Keep in mind that those instructions are for a North American model. If your car is an AUS model, some of the wiring MAY be different. In that case, you are on your own. You should be familiar with the use of a multimeter in order to verify the proper connections. I suspect they will be very close to the wiring in the NA models.