@
viscositosis.rex @
gpshumway @
bluesubie @
SubieNate
I have a boosted BRZ with E85, stock block, close to 500 whp, hard driven on the street (highway pulls since there are ZERO canyons in Miami...), non daily driver, would change oil for a track day to something more robust. I have no Cats, so if one of them will save the engine but kill cats.. no fawks given...
So far I've only used Motul 0w-30 Xlite and Eco energy 5w-30.
I had a misfortune the last couple of weeks where a oil line popped off a few times and thus spent a ridiculous amount of money on oil just to pour it on the ground... I really REALLY want to find an off the shelve oil...
Which one of the below oils fit my car better? 5w-30 idea comes out of Subaru recommending 5w-30 for the FA20DIT.
Mobil 1 regular 5w-30
SAE Grade 5W-30
Viscosity, cSt (ASTM D445)
@ 100ºC 11.0
@ 40ºC 61.7
Viscosity Index 172
Sulfated Ash, wt% (ASTM D874) 0.8
HTHS Viscosity, mPa•s @ 150ºC (ASTM D4683) 3.1
Pour Point, ºC (ASTM D97) -42
Flash Point, ºC (ASTM D92) 230
Density @15.6 ºC, g/ml (ASTM D4052) 0.855
Mobil 1 High Mileage 5w-30
SAE Grade 5W-30
Viscosity, cSt (ASTM D445)
@ 100ºC 11.7
@ 40ºC 69.2
Viscosity Index 165
HTHS Viscosity, mPa•s @ 150ºC (ASTM D4683) 3.3
Pour Point, ºC (ASTM D97) -39
Flash Point, ºC (ASTM D92) 230
Density @15.6 ºC g/ml (ASTM D4052) 0.856
Mobil 1 Extended Performance 5w-30
Viscosity @ 100ºC 10.6
@ 40ºC 59.8
Viscosity Index 169
Sulfated Ash, wt% (ASTM D874) 0.8
HTHS Viscosity, mPa•s @ 150ºC (ASTM D4683) 3.0
Pour Point, ºC (ASTM D97) -40
Flash Point, ºC (ASTM D92) 230
Density @15.6 ºC g/ml (ASTM D4052) 0.851
Mobil 1 ESP 5w-30
SAE Grade 5W-30
Viscosity, cSt (ASTM D445)
@ 100ºC 12.1
@ 40ºC 72.8
Viscosity Index 164
Sulphated Ash, wt% (ASTM D874) 0.6
HTHS Viscosity, mPa•s @ 150ºC (ASTM D4683) 3.58
Pour Point, ºC (ASTM D97) -45
Flash Point, ºC (ASTM D92) 254
Density @15.6 ºC g/ml (ASTM D4052) 0.850