Quote:
Originally Posted by kthxbai
Hi @ EndlessAzure, I apologize for bringing this thread back from the head. I have a base 2013 FRS and just acquired a pair of gently used Release Series headlights. Wiring is not my forte and I've tried to follow the diagrams on the forum to no avail when trying to make the BeatSonic always-on module work fully. The best I managed was no DRL function with ebrake down but the LED strip does stay on with the headlight at a dimmer setting. Could you shed some light on what I'm missing when using the BeatSonic module? My goal is to have the DRL function with ebrake down and LED bar on with headlights. Thank you for your time.
Sent from my Pixel 3 using Tapatalk
|
If you want DRL, you will need to add a new wire:
- Either through a splice from the DRL resistor power ("traditional method" with high beam flap issue)
- Or a Splice from high beam power with a diode, to prevent the high beam from triggering at night due to the always-on module (this thread).