Are you saying run a new power wire from the battery for this alpine unit?
I’m not experiencing any ground static as I’m yet to do the install. But from what I’ve been reading in the pages of this thread there seems to be an issue with static from the ground wire.
The oem kicker sub plugs into the back of the head unit and powers through the wiring harness. It’s sounds ok but now the doors and tweeters are falling behind.
I’m going to try this first and see if this helps complete the sound.
If not, then full build ahead this summer.
I just need more volume and omphh from the door speakers and tweeters.
Quote:
Originally Posted by soundman98
imo, it's much better to run a new power wire from the battery.
things can be cobbled together with the oem wiring, but at the level of effort of replacing the speakers and the amp, it's really better to just replace the wiring as well to get the most out of the new parts.
what kind of 'ground static' are you experiencing?
|