Quote:
Originally Posted by steve99
check your closed loop AFR tables A and
B make sure their are negative values in all cells . Positive or zero values cause weird issues. As its an offset of 14.7, its strange your target afr is leaner than 14.7, usually the ecu wont do that.
unless its a logging issue
|
Thanks steve, I've attached the flashed rom and a log. Everything seems to be in check. CL fuel target (load) are all negative though (ECT) tables do have zeros in them.
Its all logged through tactrix using supplied txt file but some parameters were removed for faster refresh times. I've updated the file now so I'll find out pretty soon if logging was an issue