|
Here is my simple guide:
Passenger Side:
1. Unbolt injector driver ECU
2. Unbolt metal sound deadening cover
3. Unbolt fuel rail
4. Unclip injectors
5. Remove injectors
6. Install new injectors
7. Bolt fuel rail back down (depending on injectors, might require spacer as well)
8. Clip in injectors (depending on injectors, might require wiring adapters)
9. Reverse of removal
Driver Side:
1. Disconnect both fuel lines with a fuel line removal tool (will be smallest one available at local parts store and is a plastic tool that goes in the end of the fuel line)
2. Disconnect the fuel vent hose which is held on with a standard clip
3. Unbolt metal sound deadening cover
4. Unbolt fuel rail
5. Unclip injectors
6. Remove injectors
7. Install new injectors
8. Bolt fuel rail back down (depending on injectors, might require spacer as well)
9. Clip in injectors (depending on injectors, might require wiring adapters)
10. Reverse of removal
|