|
This just happened to me yesterday. When I got back I rubbed Toyota/Subaru all purpose lube on it and generally just worked the seal until its shaped returned to somewhat normal, and kept applying it. I also cleaned the rubber residue off the window to help it slide over the seal instead of folding it up. Another thing, when I took the seal out, I noticed some minor rust happening and cleaned it right away, as well as there seems to be a yellow clip behind the screw that hold the part of trim where it starts the bend down the A-pillar-I'm wondering if removing this yellow plastic piece will help make a difference as the rest of the screws do not have it and you can see an imprint in the back of seal at that location which also happens to be where the seal gets caught and folds up? Hope this helps and we can solve this. Also I think there is an adjustment possibility in the door for the window track to compensate.
|