Quote:
|
I don't know. What do you have / recommend? Thanks!
|
For toe, try going with:
1/8" toe OUT on front (total, not per side) (roughly 0.20 in degrees)
Some recommend zero toe all the way around but I like a bit of toe-out on the front as it helps with turn-in. Plus it will be a bit more stable and not too darty.
Zero toe on rear
You could also go with 1/16" of toe-in on the rear to make it more stable as well. Just make sure there is
no toe-out on the rear.
Phil will do a great job for you at CTC Carling (& Ralf too of course but request Phil to do the work).
Oh, and Phil would probably know this, but make sure you go to Maximum Caster as well.