Quote:
Originally Posted by Hanakuso
So according to Dezoris the hoses need to be these sizes, but what about the barbs/nipples? I notice he is running 0.425 OD and 0.5 OD size barbs. 11/32 which equals to 0.343 vs 0.425 seems to be a pretty big difference.
I'll be buying from Saikou Michi so he can fab up different barb sizes.
|
Using 3/8 Tubing and -6AN two piece 90 Degree Barb for the PCV to inlet will be good going forward and 1/2" for the outlet barb if you are running N/A.
Here is my finished Vortech Dual Can.