Quote:
Originally Posted by mid_life_crisis
How hard was it to snake all those wires to the door?
|
I just finished my install and the wires to the doors are some of the more difficult I've worked with. In order to run the wire thru the grommet it requires removing the tape holding the two boots together then snaking the wire past the bottom of the top boot, cutting a hole for the wire to poke thru the bottom boot before reinstalling the top boot and re-taping it. Sounds confusing but if you attempt this it'll probably make more sense... Not to mention it took me FOREVER to reattach the boot to the car, but it was worth it!
I decided to go with the alpine type R's partially due to the very small crossovers, about 1" by 1" by 2", but in the end I ran them active and didn't use them. Either way I am very pleased with the sound and would recommend either set-up, active or passive.