Quote:
Originally Posted by Shit Luck
mine were a 12mm stud... 14mm on the hub side and 12mm on the wheel side.
in fact i have a set waiting to go on my rabbit track car when the cage is done so i can run aftermarket wheels. i would take a pic but they are a long way from home at the shop.
link to a set on ebay.
http://www.ebay.com/itm/14x1-5-TO-12...p2047675.l2557 |
Good point... most of the stud conversions I dealt with before in the past were straight 14/14mm studs, since they run wheels meant for German cars and didn't deal with wheels drilled for 12mm.
Either way, the most important thing for this thread is:
- Plenty of wheels available
- FRS/BRZ is niche market car, and wheel companies will eventually come out with newer designs, demand-permitting
- Beware of online fitment guides, not everything is accurate and/or easily swapped around.
-alex