Quote:
Originally Posted by xjohnx
Good move pursing the loaner set. I think that'll help a lot of people get off the fence.
For those concerned about removing/replacing the lights, it's a dead simple job. Deep well 8mm socket, 4 bolts per taillight, and a small pick or jewelers screwdriver to remove the wire harness clips.
I would also recommend contacting @ wdninja for some taillight gaskets to install when you swap the lights to help mitigate any potential condensation issues. Maybe @ Pure Automotive could even start stocking those gaskets. |
I can provide a loaner set of the stock tail lights (with LED blinker bulbs). And yes, PM me if you need some new gaskets.