Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - EasyGo Keyless Door system for FRS and BRZ

goodcjw2 · 05-23-2013, 07:09 AM

I just get my easygo kit today and was able to wire the ignition harness. This part was kind of straight forward, except that the harness color labeling was totally wrong.

Thanks to 086A's post and diagram, I made the push button partially work.

http://www.ft86club.com/forums/showt...n+start&page=5

https://dl.dropboxusercontent.com/u/...-S%20Alarm.pdf

However, can only use it to switch between "OFF", "ACC" and "ON", but not really start the engine.
I have not touch any wire related to ECU, maybe that's the obvious reason that I cannot start the engine.

05-23-2013, 07:09 AM	#125
goodcjw2 Junior Member Join Date: Apr 2013 Drives: 13 FR-S Location: Los Angeles Posts: 6 Thanks: 0 Thanked 1 Time in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I just get my easygo kit today and was able to wire the ignition harness. This part was kind of straight forward, except that the harness color labeling was totally wrong. Thanks to 086A's post and diagram, I made the push button partially work. http://www.ft86club.com/forums/showt...n+start&page=5 https://dl.dropboxusercontent.com/u/...-S%20Alarm.pdf However, can only use it to switch between "OFF", "ACC" and "ON", but not really start the engine. I have not touch any wire related to ECU, maybe that's the obvious reason that I cannot start the engine.