[redsuns03]

Originally Posted by nzer

Everything you need is in the pack except
1. Antenna adapter http://www.ebay.com.au/itm/111046104...84.m1497.l2649

2. Compatible Bluetooth dongle to get torque working http://www.ebay.com.au/itm/USB-V-4-0...c023aef&_uhb=1

3. ELM327 to plug into the OBD2 http://www.ebay.com.au/itm/Super-Min...1e4efd4&_uhb=1

All pretty cheap. Links are to ebay Oz but you can get from international eBay or dx.cm too.

Actual unit fits with the OEM mounts off the OEM head unit and the OEM dash bezel. Unbolt the original, transfer the mounts from OEM unit to bew oe n bolt bak in using the OEM mount points. One plug to plug into backed the antenna adapter and that's it.

If you don't want to use torque then all you need is item 1

I've been reading everything I could find about installing the TUN21A.

1.So I what you're saying is I can use the OEM bracket to mount the headunit?

2. Do I still need the metra wiring harness?

3. Is everything with the headunit a plug n play other than the WIFI and BT dongles?

4. Will my USB I/O below the a/c control still be functional?