So, just to update, I was able to get the push start to work, but I am still having trouble with the keyless entry. I was able to wire the can high and low, the parking lights, and the horn, but I cannot seem to get the door locks or trunk release to work. Anyone else get this kit and have any luck? I emailed easygo for help, and their reply was to get a professional to install it. Wow, thanks for the great support. My main complaint with this kit is the lack of vehicle specific instructions, and I am pretty sure Easygo themselves haven't actually done a FRS install.
For the door locks I am wiring them as such:
The lock and unlock wires I am using are the light blue and pink found at connector ED2 in this diagram (Pin 15,16).
The trigger is the yellow black found at pin 18 in this diagram (connector HD1)
Anyone have any suggestions as to which wires I should be tapping for the door lock control instead?