Quote:
Originally Posted by jshadeck
Tried to take a blind pic from under the car... Shitty pic but i think its better than nothing. I drew a red arrow to show the lip of the perch, these were taken from below/behind the front wheel. The rim lip is level with the perch height wise.
|
How much clearance do you have between the wheel/perch?
A quick way I used to measure it (cause it's really hard to read accurately off a measuring tape) is to try a variety of metric allen keys between the two pieces. That is of course if you don't already have measuring calipers.
I ended up with 8mm between rim and perch after camber bolts and alignment. Before camber bolts I had 12mm.
On an 18x9 +35 wheel.