Quote:
Originally Posted by King Tut
You held out on me with the knob. McMaster-Carr part numbers please.  |
LOL, I needed to see how it fit before recommending it!! I almost could not fit it because of AVO oil pump. Also, it is not perfect as I wanted a 90 degree conector to add at the end, but could not find it. Right now its just a threaded female conection at the end. It will drain, but it could be made so much nicer with a 90 degree towards the bottom.
MCC part number: 4082T43
http://www.mcmaster.com/#catalog/119/428/=mok4mv
Maybe you can help me finish it finding the 90 degree angle with 3/8 NPT male. I also though about a hose barb, but that would not fit with the AVO pump.