I measured the calipers' width from both the back of the mounting bracket and from face to face. They are within .5-1cm, I wasn't being too accurate. Space between hub and wheel trying to mount the wheel was about 15mm. I chalk it up to how TALL the Brembo calipers are. They are obviously a bit taller and due to this make contact with the wheel spoke near the wheel hub
EDIT: measured again, the Brembos are about 1cm taller and the half of the caliper opposite the bracket is about 1cm wider than the AP Caliper in the same dimension.
Quote:
Originally Posted by King Tut
Too much OE in this thread. Should be called OEM wheels.
|
Never sharing beer with you.