Quote:
Originally Posted by Sensisnow
Looking from the back of the car, my left tip extends about an inch further than the right one, which is almost flush with the bumper. I tried aligning it with the bushing tools, but that did nothing. I'm guessing I need to adjust the s-clamps somewhere? Any tips?
|
You can fix this by loosening the V-band at the muffler and the S pipe. But do not loosen it too much, just enough to where you can twist the S-pipe a little. Take a look at the tips and twist the S-pipe, you will see the tips move in and out as you rotate it. Move it into place and snug down the muffler, V-band first, then the S pipe one.
That should allow it to work perfect.