View Single Post
Old 05-02-2013, 06:25 PM   #7
Freetime
Senior Member
 
Freetime's Avatar
 
Join Date: Mar 2013
Drives: Raven Manual FRS
Location: Jacksonville, FL
Posts: 275
Thanks: 84
Thanked 241 Times in 97 Posts
Mentioned: 1 Post(s)
Tagged: 1 Thread(s)
Quote:
Originally Posted by official_george View Post
I have a manual FR-S, with these issues:

1. Shifting into first gear (from neutral at 0mph or from higher gears at less than 10mph) produces a *thud* sound and very slightly jerks the car a little. I supposed this is the clutch connecting the engine to the wheels, but is it really that noticeable? This happens 50% of the time, and usually when the RPM is decreasing.

2. Shifting from 1st to 2nd gear produces a metallic clunk (not grind). It doesn't sound that bad, more like when cocking a gun, you can hear the gears "meshing" together. Is this normal? Only on 1st to 2nd gear.

3. Are the shift points that low or am I just not getting it? Whenever speeding up (to merge into a freeway from a stop), when I'm upshifting, I get a thud and a jerk. I usually upshifts at 2.5-3K RPM or every 15mph. I let go of the clutch pedal quickly because I don't want to burn out the clutch early. Is this wrong? Should I be letting the clutch go slowly?
Might not be for everyone, but for me, it shifts much smoother if I shift closer to 4k. The lower the RPM when I shift, the clunkier it is.
Freetime is offline   Reply With Quote