|
not sure if you are asking me that question, but I wouldn't go 18x10 in the front unless you plan on running a high offset or a good amount of camber. I think a 9" wheel up front is perfect to fill the gap and not run a lot of camber. 9.5 is doable too but you would need around 2 or possibly a little less depending on how low you go.
Not sure how much 1.5 drop would bring the car down to..but keep in mind even if you could run a 10 lets say on that much of a drop without rubbing, you would be sticking out of the fender and would have a massive amount of poke.
Nothing on my setup rubs just a FYI.
|