Quote:
Originally Posted by Kodename47
And those points mean nothing. Manipulation just means then MAF reading is different for the same volume of air. The diameter of the MAF location is half the story, by changing anything both before and after the sensor will alter the path the air takes. The MAF only reads a tiny fraction of the air passing through the tube so if the air is behaving differently due to any of the above then the readings will be "manipulated".
|
I disagree. That box being large as it is should collect a very stable pack of air before it feeds into the intake tube. There are no obstructions to flow and the air comes through a very generous filter area. Looks like a good design for picking off accurate readings to me. I have a much easier time believing it simply flows more air.