|
Ok just checked the Legacy 2.5GT/3.6R (specifically those two models).. 12.4" and 11.4" rear, both vented.. so perhaps they are using Legacy 2.5GT/3.6R brakes. If the Legacy uses 2 piston front sliders then maybe this car will be rocking brakes that are used to easily stop ~3500lb cars.. that would be PLENTY of brake for everyone until you are pushing an insane amount of power with long track sessions braking from high speeds.. They could also be mixing, WRX front/Leg GT rears, etc.. I'm sure they spent plenty of time setting up the bias/brake balance correctly so whatever they used will work fine.
__________________
-Dave
Track cars: 2013 Scion FRS, 1998 Acura Integra Type-R, 1993 Honda Civic Hatchback
DD: 2005 Acura TSX
Tow: 2022 F-450
Toys: 2001 Chevrolet Corvette Z06, 1993 Toyota MR2 Turbo, 1994 Toyota MR2 Turbo, 1991 Mitsubishi Galant VR-4
Parts: 2015 Subaru BRZ Limited, 2005 Acura TSX
Projects: 2013 Subaru BRZ Limited track car build
FS: 2004 GMC Sierra 2500 LT CCSB 8.1/Allison with 99k miles
|